<July 2, 2009>

F-710C and F-711E Spacers

I didn't have much time tonight, but I did manage to get a little bit done. I had fabricated the F-710C and F-711E Spacers last night, but didn't log it so that time is included in today's entry.



1- To drill the spacers through the Aft Deck I borrowed a trick from my buddy Chad; I used some strapping tape to hold the spacers in position under the Aft Deck.

2- After drilling I removed the aft deck and found that the tape did its job perfectly.

3- Again I removed the F-711D Angle to check the holes. All is good here.