<March 13, 2007>
My dad and step-mom had been here for a brief visit, so I haven't been able to do much for the past few days. However, I did manage to run out the shop for a few minutes here and there to drill the remaining holes in the long pushrods. Doing so only took a few minutes over the course of a few days so it wasn't worth its own log entry.
Tonight I drilled the small aileron pushrods and riveted the long ones. Nothing major to report with no issues or problems encountered, which is always a good thing.
I marked the locations for the hole and using my drill-jig-thingy I drilled the small pushrods using low RPMs and Boelube. Easy peasy!
I then riveted the long pushrods using the MSP-42 rivets called for on the plans.