<November 4, 2006>

Started Right Aileron

First thing I did today was to deburr the rest of the stiffeners (for the right aileron). I hate all this deburring, but it must be done. Once the stiffeners were deburred, I match drilled them to the right aileron skin, then deburred and dimpled all the parts (right and left).

Here are all 32 stiffeners, after being deburred, dimpled and cleaned, getting a light coat of primer.

After dimpling the aileron skins, I got set-up to back rivet the stiffeners to the skins. I had a social engagement, so I stopped here.