<October 17, 2006>

Duburred Right Wing Skins & More Light Prep

My buddy Jeff came over for more punishment tonight. While he was busy deburring the right wing skins I drilled the leading edge landing light holes in preparation for mounting the lenses.



First I marked the locations for the holes using the paper template.

Once the hole locations were marked, I clamped the retaining strips in place and used them as a drilling guide.

Before drilling, I circled the hole in the retaining strip that I wanted to drill through. This should help prevent me from drilling any extra unnecessary holes in the leading edge.

The results of Jeff's hard work... deburred wing skins. Thanks Jeff!