<June 28, 2006>

Drill Right Inboard Rib & Capacitive Senders

Three nights in a row, it is a miracle! It sure feels good to be making progress. I got a late start tonight, so not much was acoomplished, but I'll still take it. I started tonight by match drilling the right T-405 to Rib to T-410. Pretty easy stuff. I then moved onto the capacitive senders for the right side, drilling them to the ribs and trimming the outboard sender where necessary.



Not much to report here as it is the same as the left side. Again, I just had to be careful where I places the rivets so that they wouldn't interfere with the AN nut.