<December 24, 2005>

Drilled Wing Walk Doublers

We have family in from out of town so time in the shop will be limited over the next week. That being said, I managed to squeeze a little construction in today. Nothing too exciting today, fabricated then drilled the Wing Walk Doublers using the skins as a drilling guide. Once the doublers were drilled I clecoed on the top skins to test fit. Easy peasy!

Per the plans I drew a line on the skin to in order to set the doubler back from the forward spar.

I taped the doubler in place, flipped it all over, and drilled away.

Things are starting to look really cool! The doublers fit perfectly.